The LEC150 is a low cost, co***ct
and easy to use encoder based cable-
extension transducer. It is available
with full stroke ranges up to 150 inches.
The LEC150 provides an incremental
encoder feedback signal.
Simply mount the body of the trans-
ducer to a fixed surface and attach the
extension cable to the moving object.
The LEC150 is recommended for ap-
plication where ***ce and money is
limited.
GENERAL
Range..................................0-25 to 0-150 in., 0-625 to 0-3750 mm, see back page
Weight.........................................................................................................3 lbs., max.
Enclosure Materials........................................powder coated and anodized aluminum
Sensor................................................................................incremental optical encoder
Electrical Connection...................................................................................flying leads
ELECTRICAL
Input Voltage..................................................................................5 to 30 VDC, see
Output.....................................................................incremental encoder signal, see
PERFORMANCE
Accuracy..............................................+ 0.010 to 0.060 in., + 0.25 to 1.50 mm, see
Repeatability.......................................+ 0.005 to 0.030 in., + 0.12 to 0.75 mm, see
Resolution........................................................10 to 1250 ppi, 0.5 to 50 ppmm, see
Cable Tension.......................................................6 to 12 oz., 170 to 709 gms., see
MECHANICAL
Measuring Cable....................................................0.015 inch dia. stainless steel rope
Measuring Cable End Fitting...............................................................crimp and swivel
ENVIRONMENTAL
0000
Operating Temperature.................................................. 0F to +160F (-20C to 70C)
Humidity............................................................... |
Home
